BJTTL - SIGN FINISHING CLEAR

  • MSDS: BJTTL
  • Manufacturer: T J RONAN PAINT CORP
  • Product Name: SIGN FINISHING CLEAR
  • National Stock Number: 8010-00F014208
Product Identification

Product ID:SIGN FINISHING CLEAR
MSDS Date:04/25/1986
FSC:8010
NIIN:00F014208
MSDS Number: BJTTL

Responsible Party
T.J. RONAN PAINT CORP
749 EAST 135TH STREET
BRONX, NY 10454

Emergency Phone: (212) 292-1100

Info Phone: (212) 292-1100

Cage: FO720

Contractor
T.J. RONAN PAINT CORP.
BRONX, NY 10454 US

Telephone: (212) 292-1100

Cage: FO720

Ingredients

MINERAL SPIRITS, PETROLEUM SPIRITS

CAS: 64475-85-0

RTECS: PY8240000

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM


METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


COBALT (SARA III)

CAS: 7440-48-4

RTECS: GF8750000

OSHA PEL 0.1 MG/M3;AS CO

ACGIH TLV: 0.05 MG/M3;DUST 9293

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NOSE/THROAT IRRITATION.
CNS DEPRESSION CHARACTERIZED BY HEADACHE, DIZZINESS, NAUSEA,
STAGGERING GAIT, CONFUSION, UNCONSCIOUSNESS. SKIN: IRRITATION,
DERMATITIS. EYES: IRRITATION, BURNING. I NGESTION: GASTROINTESTINAL
DISTRESS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: MAY LEAD TO PERMANENT BRAIN DAMAGE
& NEVOUS SYSTEM DAMAGE. SKIN: IRRITATION & DERMATITIS.

First Aid

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
WASH W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. GIVE CPR IF
NEEDED. INGESTION: OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:TCC
Flash Point:107F
Lower Limits:1%
Upper Limits:7%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:USE SELF CONTAINED BREATHING APPARATUS. WATER
MAY BE UNSUITABLE AS EXTINGUISHING MEDIA, BUT HELPFUL IN KEEPING
ADJACENT CONTAINERS COOL.
Unusual Fire/Explosion Hazard:KEEP WORK AREAS FREE OF HOT METAL
SURFACES & KEEP AWAY FROM HEAT, SPARKS & OPEN FLAMES.

Accidental Release

Spill Release Procedures:ELIMINATE ALL HEAT SOURCES, OPEN FLAMES &
OTHER SOURCES OF IGNITION. ABSORB W/SOLID ABSORBENT. SHOVEL INTO
CONTAINERS. IF LARGE QUANTITIES ARE SPILLED PERSONAL PROTECTIVE
EQUIPMENT MAY BE REQUIRED.

Handling

Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. KEEP PROPDUCT CONTAINERS COOL, DRY & AWAY FROM SOURCES OF
IGNITION. AVOID INHALATION OF VAPORS.
Other Precautions:USE W/ADEQUATE VENTILATION. AVOID CONTACT W/SKIN.

Exposure Controls

Respiratory Protection:DEPENDS ON VAPOR CONCENTRATION >TLV, USE NIOSH
RESPIRATOR FOR ORGANIC VAPORS
Ventilation:LOCAL EXHAUST: PREFERRED-PAINT SPRAY BOOTH
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:SPLASH GOGGLES, FACE SHIELD
Work Hygienic Practices:WASH SKIN AFTER CONTACT, BEFORE BREAKS & MEALS.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:313-388F
Vapor Pres:3.0
Vapor Density:3.8-4.9
Spec Gravity:0.779
Evaporation Rate & Reference:(BU AC = 1): 3.0
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR & MILD ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS, OR BASES & SELECTED AMINES
Stability Condition to Avoid:HOT METAL SURFACES, HEAT, SPARKS, OPEN
FLAMES, SOURCES OF IGNITION.
Hazardous Decomposition Products:COBALT COMPOUNDS, CO, CO2

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.